SPECIFICATION:
| MODEL |
MWP-608 |
| OUTPUT |
DC VOLTAGE |
5V |
12V |
24V |
| RATED CURRENT |
10A |
2A |
1.25A |
| CURRENT RANGE |
3-15A |
0.2-4A |
0.2-4A |
| RATED POWER |
104W |
| RIPPLE & NOISE (max.) Note.2 |
50mVp-p |
120mVp-p |
150mVp-p |
| VOLTAGE ADJ. RANGE |
CH1: 4.75 ~ 5.5V |
| VOLTAGE TOLERANCE Note.3 |
±2% |
±8% |
-5,+10% |
| LINE REGULATION |
±0.5% |
±1% |
±1% |
| LOAD REGULATION |
±1% |
±6% |
±8% |
| SETUP, RISE, HOLD TIME |
200ms,50ms,16ms |
| INPUT |
VOLTAGE RANGE |
88 ~ 132VAC / 176 ~ 264VAC selected by switch |
| FREQUENCY RANGE |
47 ~ 63Hz |
| EFFICIENCY (Typ.) |
80% |
| AC CURRENT |
2.8A/115VAC 1.7A/230VAC |
| INRUSH CURRENT (max.) |
COLD START 20A/115VAC 40A/230VAC |
| LEAKAGE CURRENT |
<3.5mA / 240VAC |
| PROTECTION |
OVERLOAD |
150 ~ 200% rated output power.(CH1:19.2 ~29.2) |
| Protection type: Fold back current limiting, recovers automatically afete fault condition is removed |
| FUNCTION |
OPERATIONG DISPLAY |
Double color LED correct Range: Green(5~5.4Vref.); Wrong Range:Red |
| ENVIRONMENT |
WORKING TEMP. |
-10 ~ +60ºC (Refer to output load derating curve) |
| WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY |
-20 ~ +85ºC , 10 ~ 95% RH |
| TEMP. COEFFICIENT |
±0.05%/ (0 ~ 50ºC) ON +5V output |
| VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| SAFETY & EMC (Note.4) |
SAFETY STANDARDS |
Design refer to UL60950-1, TUV EN60950-1 |
| WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMI CONDUCTION & RADIATION |
EN55022(CISPR22) Class B |
| HARMONIC CURRENT |
EN61555-2,-3 |
| EMS IMMUNITY |
EN61000-4-2,3,4,5 Light industry level, criteria A |
| OTHERS |
MTBF |
267K hrs min. MIL-HDBK-217F (25ºC) |
| DIMENSION |
180*110*50mm(L*W*H) |
| PACKING |
0.9Kg; 16pcs/15.4Kg/0.0287CMB |
| NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
5.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
Detailed Datasheet
No.:MIC-QIP-AS073208
