SPECIFICATION:
| MODEL |
SP-500-12 |
SP-500-13.5 |
SP-500-15 |
SP-500-24 |
SP-500-27 |
SP-500-48 |
| OUTPUT |
DC VOLTAGE |
12V |
13.5V |
15V |
24V |
27V |
48V |
| RATED CURRENT |
40A |
36A |
32A |
20A |
18A |
10A |
| CURRENT RANGE |
0 ~ 40A |
0 ~ 36A |
0 ~ 32A |
0 ~ 20A |
0 ~ 18A |
0 ~ 10A |
| RATED POWER |
480W |
486W |
480W |
480W |
486W |
480W |
| RIPPLE & NOISE (max.) Note.2 |
240mVp-p |
240mVp-p |
240mVp-p |
240mVp-p |
200mVp-p |
300mVp-p |
| VOLTAGE ADJ. RANGE |
10 ~ 13.2V |
12 ~ 15V |
13.5 ~ 18V |
20 ~ 26.4V |
26 ~ 32V |
41 ~ 56V |
| VOLTAGE TOLERANCE Note.3 |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| LINE REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| LOAD REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| SETUP, RISE, HOLD TIME |
1500s, 50ms, 24ms |
| INPUT |
VOLTAGE RANGE |
88 ~ 264VAC 124 ~ 370VDC |
| FREQUENCY RANGE |
47 ~ 63Hz |
| POWER FACTOR |
PF>0.95/115 PF>0.95>240VAC at full load |
| EFFICIENCY (Typ.) |
84% |
84% |
83% |
85.5% |
86.5% |
87% |
| AC CURRENT |
7A/115V 3.5A/230V |
| INRUSH CURRENT (max.) |
18A/115V 36A/230V |
| LEAKAGE CURRENT |
<3.5mA / 240VAC |
| PROTECTION |
OVERLOAD |
105 ~ 135% of rate load |
| Protection type: Fold back current limiting, recovers automatically after fault condition is removed |
| OVER VOLTAGE |
13.8 ~ 16.2V |
15.5 ~ 18.2V |
18 ~ 21V |
27.6 ~ 32.4V |
31 ~ 36.5V |
57.6 ~ 67.2V |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed. |
| FAN CONTROL,O.T.P. |
RTH1 or RTH2≧50ºC FAN ON,≦45ºC FAN, ≧70ºC output shut down |
| FUNCTION |
REMOTE CONTROL |
RC+/RC-:Short = power on ; Open = power off |
| ENVIRONMENT |
WORKING TEMP. |
-10 ~ +50ºC (Refer to output load derating curve), 20 ~ 90% RH non-condensing |
| WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY |
-20 ~ +85ºC, 10 ~ 95% RH |
| TEMP. COEFFICIENT |
±0.03%/ºC (0 ~ 50ºC) |
| VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| SAFETY & EMC (Note.4) |
SAFETY STANDARDS |
Design refer to UL1950, TUV EN60950-1 |
| WITHSTAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMI CONDUCTION & RADIATION |
Compliance to EN55022 (CISPR22) Class B |
| HARMONIC CURRENT |
Compliance to EN61000-3-2,-3 |
| EMS IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11;ENV50204,Light industry level,criteria A |
| OTHERS |
MTBF |
133.4K hrs min. MIL-HDBK-217F (25ºC) |
| DIMENSION |
170*120*93mm (L*W*H) |
| PACKING |
1.807Kgs/pcs, 10pcs/19.53Kgs/0.0326CMB |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details. |
|
Detailed Datasheet
No.:MIC-QIP-AS073208
