600W Single Output Switching Power SupplySE-600 series
600W Single Output Switching Power Supply Features:
High power density 4.9w/in3
AC input active surge current limiting
AC input range selected by switch
Protections:Short circuit/Over load/Over voltage/Over temperature
Forced air cooling by built-in DC fan
Built-in remote sense function
Low cost
SPECIFICATION:
MODEL

SE-600-5

SE-600-12

SE-600-15

SE-600-24

SE-600-27

SE-600-48
OUTPUT DC VOLTAGE 5V 12V 15V 24V 27V 48V
RATED CURRENT 100A 50A 40A 25A 22.2A 12.5A
CURRENT RANGE 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 25A 0 ~ 22.2A 0 ~ 12.5A
RATED POWER 500W 600W 600W 600W 599.4W 600W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p
VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10 ~ 13.5V 13.5 ~ 16.5V 22 ~ 26.4V 24 ~ 30V  43 ~ 56V
VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±2.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE, HOLD TIME 1000ms, 50ms, 20ms/230VAC,  1000ms, 50ms, 50ms/115VACat full load
INPUT VOLTAGE RANGE 90 ~ 130VAC / 180~260VAC selected by switch, 254~370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 78% 83% 84% 87% 87% 88%
AC CURRENT 12A / 115VAC, 7.5A / 230VAC
INRUSH CURRENT (max.) 25A / 230VAC, 50A / 230VAC
LEAKAGE CURRENT <2.0mA / 240VAC
PROTECTION OVERLOAD 110~135% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
OVER VOLTAGE  5.75 ~ 6.3V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover.
OVER TEMPERATURE 85ºC± 5ºC (TSW1) Detect on heatsink of power transistor
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT WORKING TEMP.,HUMIDITY -20 ~ +60ºC (Refer to output load derating curve), 20 ~ 90% RH
STORAGE TEMP., HUMIDITY -40 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.05%/ºC (0 ~ 50ºC)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC SAFETY STANDARDS Design refer to UL60950-1
WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
OTHERS MTBF 197khrs min. MIL-HDBK-217F (25ºC)
DIMENSION 247*127*63.5mm (L*W*H)
PACKING 2.1Kg; 6pcs/13.4Kg/0.98CUFT
NOTE 1.All parameters are specified at 230VAC input, rated load, 25ºC. 70% RH. Ambient.
2.Tolerence: includes set up tolerance, line regulation, load regulation.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.