25W Single Output Switching Power SupplyS-25 series
25W Single Output Switching Power Supply Features:
Universal AC input / Full range
Protections: Short circuit/Over load/Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 56KHz		 Detailed Datasheet
  • SGS Auditer Supplier Mingwei AutomationNo.:MIC-QIP-AS073208
  • Mingwei Automation CE & RoHS
    		•
    SPECIFICATION:
    MODEL

    S-25-5

    S-25-12

    S-25-15

    S-25-24
    OUTPUT DC VOLTAGE 5V 12V 15V 24V
    RATED CURRENT 5A 2.1A 1.7A 1.1A
    CURRENT RANGE 0 ~ 5A 0 ~ 2.1A 0 ~ 1.7A 0 ~ 1.1A
    RATED POWER 25W 25.2W 25.5W 26.4W
    RIPPLE & NOISE (max.) Note.2 50mVp-p 100mVp-p 100mVp-p 100mVp-p
    VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V
    VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0% ±1.0%
    LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5%
    LOAD REGULATION ±1.0% ±0.5% ±0.5% ±0.5%
    SETUP, RISE TIME 300ms, 50ms/230VAC 800ms, 50ms/115VAC at full load
    HOLD TIME(TYP.)  90ms/230VAC      12ms/115VAC at full load
    INPUT VOLTAGE RANGE 85 ~ 264VAC     120 ~ 370VDC
    FREQUENCY RANGE 47 ~ 63Hz
    EFFICIENCY (Typ.) 72%/115VAC 76%/115VAC 77%/115VAC 80%115VAC
    AC CURRENT(Typ.) 0.6A/115VAC 0.35A/230VAC
    INRUSH CURRENT (max.) COLD START 13A/115VAC           25A/230VAC
    LEAKAGE CURRENT <0.75mA / 240VAC
    PROTECTION OVERLOAD 105 ~ 150% rated output power
    Protection type: Hiccup mode, recovers automatically after fault condition is removed.
    OVER VOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V
    Protection type: Hiccup mode, recovers automatically after fault condition is removed.
    ENVIRONMENT WORKING TEMP. -10 ~ +60ºC (Refer to output load derating curve)
    WORKING HUMIDITY 20 ~ 90% RH non-condensing
    STORAGE TEMP., HUMIDITY -20 ~ +85ºC, 10 ~ 95% RH
    TEMP. COEFFICIENT ±0.03%/ºC (0 ~ 50ºC)
    VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
    SAFETY & EMC (Note.4) SAFETY STANDARDS Design refer to UL1012, TUV EN60950-1 
    WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
    ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
    EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
    HARMONIC CURRENT Compliance to EN61000-3-2,-3
    EMS IMMUNITY Compliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A
    OTHERS MTBF 330.8K hrs min. MIL-HDBK-217F (25ºC)
    DIMENSION 99*97*36mm (L*W*H)
    PACKING 0.33Kg; 60pcs/21.94Kg/0.0326CMB
    NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
    2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
    3.Tolerance: includes set up tolerance, line regulation and load regulation.
    4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.