15W Single Output Switching Power SupplyS-15 series
15W Single Output Switching Power Supply Features:
AC input range selected by switch
Protections: Short circuit/Over load
Cooling by free air convection
100% full load burn-in
Fixed switching frequency at 37KHz
Lost cost
High reliability		 Detailed Datasheet
  • SGS Auditer Supplier Mingwei AutomationNo.:MIC-QIP-AS073208
  • Mingwei Automation CE & RoHS
    		•
    SPECIFICATION:
    MODEL

    S-15-5

    S-15-12

    S-15-24
    OUTPUT DC VOLTAGE 5V 12V 24V
    RATED CURRENT 3A 1.3A 0.7A
    CURRENT RANGE 0 ~ 3A 0 ~ 1.3A 0 ~ 0.7A
    RATED POWER 15W 15.6W 16.8W
    RIPPLE & NOISE (max.) Note.2 50mVp-p 50mVp-p 100mVp-p
    VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10.8 ~ 13.2V 21.6 ~ 26.4V
    VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0%
    LINE REGULATION ±0.5% ±0.5% ±0.5%
    LOAD REGULATION ±1.0% ±0.5% ±0.5%
    SETUP, RISE, HOLD TIME 200ms, 100ms, 30ms at full load
    INPUT VOLTAGE RANGE 85 ~ 132VAC / 170 ~ 264VAC selected by switch 240 ~ 370VDC
    FREQUENCY RANGE 47 ~ 63Hz
    EFFICIENCY (Typ.) 65% 68% 72%
    AC CURRENT 0.5A/115VAC 0.25A/230VAC
    INRUSH CURRENT (max.) COLD START 15A/115VAC 30A/230VAC
    LEAKAGE CURRENT <0.5mA/240VAC
    PROTECTION OVERLOAD 105 ~ 135% rated output power
    Protection type: Constant current limiting, recovers automatically after fault condition is reoved
    ENVIRONMENT WORKING TEMP. -10 ~ +60ºC (Refer to output load derating curve)
    WORKING HUMIDITY 20 ~ 90% RH non-condensing
    STORAGE TEMP., HUMIDITY -20 ~ +85ºC, 10 ~ 95% RH
    TEMP. COEFFICIENT ±0.02%/ºC (0 ~ 50ºC)
    VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
    SAFETY & EMC  SAFETY STANDARDS Design refer to UL1012
    WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
    ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
    EMI CONDUCTION & RADIATION Design refer to FCC Part15 J Conduction Class B
    OTHERS MTBF 522.1K hrs min. MIL-HDBK-217F (25ºC)
    DIMENSION 99*97*36mm (L*W*H)
    PACKING 0.30Kg; 60pcs/19.84Kg/0.0326CBM
    NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
    2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
    3.Tolerance: includes set up tolerance, line regulation and load regulation.