SPECIFICATION:
| MODEL |
S-145-5 |
S-145-7.5 |
S-145-12 |
S-145-15 |
S-145-24 |
| OUTPUT |
DC VOLTAGE |
5V |
7.5V |
12V |
15V |
24V |
| RATED CURRENT |
25A |
18A |
12A |
9.6A |
6A |
| CURRENT RANGE |
0 ~ 25A |
0 ~ 18A |
0 ~ 12A |
0 ~ 9.6A |
0 ~ 6A |
| RATED POWER |
125W |
135W |
144W |
144W |
144W |
| RIPPLE & NOISE (max.) Note.2 |
100mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
| VOLTAGE ADJ. RANGE |
4.5 ~ 5.5V |
6 ~ 8.3V |
10.6 ~ 13.2V |
13.2 ~ 16.5V |
21 ~ 28V |
| VOLTAGE TOLERANCE Note.3 |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| LINE REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| LOAD REGULATION |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| SETUP, RISE, HOLD TIME |
100ms, 50ms, 20ms at full load |
| INPUT |
VOLTAGE RANGE |
85 ~ 132VAC/176 ~ 264VAC selected by switch |
| FREQUENCY RANGE |
47 ~ 63Hz |
| EFFICIENCY (Typ.) |
78% |
80.5% |
80.5% |
81.0% |
83.5% |
| AC CURRENT |
3.2A/115VAC 1.6A/230VAC |
| INRUSH CURRENT (max.) |
COLD START 35A |
| LEAKAGE CURRENT |
<3.5mA / 240VAC |
| PROTECTION |
OVER LOAD |
125 ~ 165% rated output power |
| Protection type: Shut down o/p voltage, re-power on to recover. |
| OVER VOLTAGE |
5.6 ~ 6.8V |
8.6 ~ 10V |
13.8 ~ 16.2V |
17.3 ~ 20.3V |
29 ~ 32V |
| Protection type: Shut down o/p voltage, re-power on to recover. |
| ENVIRONMENT |
WORKING TEMP. |
-10 ~ +60ºC (Refer to output load derating curve) |
| WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY |
-20 ~ +85ºC, 10 ~ 95% RH |
| TEMP. COEFFICIENT |
±0.03%/ºC (0 ~ 50ºC) |
| VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| SAFETY & EMC |
SAFETY STANDARDS |
Design refer to UL1012 |
| WITHSTAND VOLTAGE |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMI CONDUCTION & RADIATION |
Compliance to EN55022(CISPR22)Class B |
| EMS IMMUNITY |
Compliance to IEC801,2,3,4 Light industry level,CriteriaA |
| OTHERS |
MTBF |
286.7K hrs min. MIL-HDBK-217F (25ºC) |
| DIMENSION |
199*98*38mm (L*W*H) |
| PACKING |
0.679Kg; 30pcs/22.28Kg/0.0250CMB |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
Detailed Datasheet
No.:MIC-QIP-AS073208
