SPECIFICATION:
| MODEL |
MS-10-5 |
MS-10-12 |
MS-10-24 |
| OUTPUT |
DC VOLTAGE |
5V |
12V |
24V |
| RATED CURRENT |
2A |
0.83A |
0.42A |
| CURRENT RANGE |
0 ~ 2A |
0 ~ 0.83A |
0 ~ 0.42A |
| RATED POWER |
10W |
10W |
10W |
| RIPPLE & NOISE (max.) Note.2 |
50mVp-p |
50mVp-p |
100mVp-p |
| VOLTAGE ADJ. RANGE |
4.75 ~ 5.5V |
10.8 ~ 13.2V |
21.6 ~ 26.4V |
| VOLTAGE TOLERANCE Note.3 |
±2.0% |
±1.0% |
±1.0% |
| LINE REGULATION |
±0.5% |
±0.5% |
±0.5% |
| LOAD REGULATION |
±1.0% |
±0.5% |
±0.5% |
| SETUP, RISE, HOLD TIME |
200ms, 100ms, 30ms at full load |
| INPUT |
VOLTAGE RANGE |
85 ~ 264VAC |
| FREQUENCY RANGE |
47 ~ 63Hz |
| EFFICIENCY (Typ.) |
65% |
68% |
72% |
| AC CURRENT |
0.5A/115VAC 0.25A/230VAC |
| INRUSH CURRENT (max.) |
COLD START 15A/115VAC 30A/230VAC |
| LEAKAGE CURRENT |
<0.5mA/240VAC |
| PROTECTION |
OVERLOAD |
105 ~ 135% rated output power |
| Protection type: Constant current limiting, recovers automatically after fault condition is reoved |
| ENVIRONMENT |
WORKING TEMP. |
-10 ~ +60ºC (Refer to output load derating curve) |
| WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY |
-20 ~ +85ºC, 10 ~ 95% RH |
| TEMP. COEFFICIENT |
±0.02%/ºC (0 ~ 50ºC) |
| VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| SAFETY & EMC |
SAFETY STANDARDS |
Design refer to UL1012 |
| WITHSTAND VOLTAGE |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMI CONDUCTION & RADIATION |
Design refer to FCC Part15 J Conduction Class B |
| OTHERS |
MTBF |
522.1K hrs min. MIL-HDBK-217F (25ºC) |
| DIMENSION |
78*49*21mm (L*W*H) |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
Detailed Datasheet
No.:MIC-QIP-AS073208
